Examensarbeten på grundnivå // Basic Level Theses
Länka till denna samling:
Browse
Browsar Examensarbeten på grundnivå // Basic Level Theses efter Ämnesord "Building engineering"
Visar 1 - 16 av 16
Sökresultat per sida
Sortera efter
- PostAktörernas syn på olika miljöcertifieringssystem för fastigheter på den svenska bygg- och fastighetsmarknaden.(2010) Persson, Krister; Chalmers tekniska högskola / Institutionen för energi och miljö; Chalmers University of Technology / Department of Energy and Environment
- PostAnalys av energieffektiviseringspotentialen för luftbehandlingsaggregat baserat på mätdata för två aggregat på Östra sjukhuset i Göteborg.(2011) Johansson, Kamilla; Mattsson, Jonas; Chalmers tekniska högskola / Institutionen för energi och miljö; Chalmers University of Technology / Department of Energy and Environment
- PostAvloppsrening med relining.(2012) Nimmerfors, Joakim; Chalmers tekniska högskola / Institutionen för energi och miljö; Chalmers University of Technology / Department of Energy and EnvironmentThere are many elderly buildings, particularly those constructed during the million program, in need of renovations and plumbing replacement. An alternative to the traditional plumbing replacement is the relatively new and untested technique called relining. The purpose of the study is to thoroughly investigate the different types of relining that are currently available on the market to help enhance Peab’s knowledge before purchasing relining services. The theoretical part of this report is based on relevant information provided from companies, previous studies, investigations and reports within the area. A number of interviews with persons somehow connected to the relining business have also been done. The result is based on the made investigations and experiences various people have from working with relining. It is clear from the study that relining is a good technique if it is used and performed in a correct way and a big responsibility is placed in the hands of the person performing it. There are risks with relining and there are many cases that show a bad end product after relining. Furthermore is it hard to say whether is a good or bad alternative, since there are both good and bad results from using the technique. What can be said is that relining is a good complement to plumbing replacement and if companies based in the relining business may enter the negotiations in an early stage, the risk of problems may decrease considerably
- PostEn studie av fasändringsmaterials termiska egenskaper- tillämpning i byggnader med kylbehov.(2010) Johansson, Erika; Poltorp, Joanna; Chalmers tekniska högskola / Institutionen för energi och miljö; Chalmers University of Technology / Department of Energy and Environment
- PostEnergikartläggning av Havets Hus i Lysekil - en utredning av kondensproblematik.(2010) Hung, Benny; Luketa, Maja; Chalmers tekniska högskola / Institutionen för energi och miljö; Chalmers University of Technology / Department of Energy and Environment
- PostHållbara byggnader - En studie om miljöcertifieringssystemet Miljöbyggnad och miljöbyggprogram i Göteborg, Stockholm och Malmö(2012) Ekström, Carl-Marcus; Åslund, Wiktor; Chalmers tekniska högskola / Institutionen för energi och miljö; Chalmers University of Technology / Department of Energy and Environment
- PostHybridventilation via markkulvert - en studie av tilluftstemperaturen.(2010) Andersson, Carl; Göthberg, Christoffer; Chalmers tekniska högskola / Institutionen för energi och miljö; Chalmers University of Technology / Department of Energy and Environment
- PostIskvalitet i ishallar. En tillämpningsstudie i Åby ishall(2011) Kwiatowski, Patrik; Chalmers tekniska högskola / Institutionen för energi och miljö; Chalmers University of Technology / Department of Energy and EnvironmentI en ishall ägnar man sig åt olika aktiviteter; konståkning, ishockey, curling men även ren rekreationsåkning. Vid alla dessa aktiviteter används isen på olika sätt och detta ställer därför olika krav på hur isen bör vara. Hockeyspelare och curlingspelare föredrar en hård is, medan konståkare istället föredrar en mjukare is. För vanliga fritidsåkare duger även en ännu mjukare is än för konståkare. En litteraturstudie har genomförts för att belysa hur en bra iskvalitet på ishallen kan uppnås och hur en ishall bör utformas med dess tekniska system för att skapa bra förutsättningar för en tillfredsställande iskvalité och vistelsemiljö. Till de tekniska systemen som beskrivits hör kylmaskinen med dess köldbärare och distributionsrör i ispisten, ventilationsaggregatet med återluftsföring och avfuktningsaggregatet i ishallen. Huvudsyftet med detta examensarbete var att studera iskvaliteten i en ishall och hur denna påverkas av det omgivande lufttillståndet i hallen. Åby ishall valdes som studieobjekt. Iskvaliteten studerades ur en ishockeyspelares perspektiv där ishockeyspelare med hjälp av en enkätstudie tillfrågades om den upplevda iskvalitén under sitt träningspass. Isen fotograferades och information om isens temperatur och omgivande lufttillstånd samlades in genom enklare mätningar i samband med träningstillfället. Mätvärdena jämfördes sedan med de krav som normalt ställs på en ishockeyis. Studiens resultat gällande iskvalitén ledde fram till slutsatserna att isen i Åby ishall bl.a. är för mjuk för ishockeyspel, att isen på vissa ställen var mycket ojämn och att isen på många ställen var för tjock. En logisk konsekvens av att isen är för mjuk vid ishockeyspel är att det mycket snabbt bildas ojämnheter i isen, att isen blir sträv och att stora snömassor skrapas loss från isytan vid spel, vilket tillsammans gör att isen upplevs som långsam för ishockeyspelare. Lufttillståndet i hallen bestämdes vid flera tillfällen med olika förutsättningar och resultatet visade att den absoluta fuktigheten i hallen under tiden för mätningarna höll sig inom ramarna för vad som kan anses vara lämpligt. Avfuktningsaggregatet tycks dock vara inställt på att hålla luftfuktigheten inom mindre lämpliga gränser om man vill uppnå en bra kvalité på isen.
- PostJämförelse mellan olika värmesystem - en simuleringsstudie.(2010) Glansberg, Anna; Ljungskog, Malin; Chalmers tekniska högskola / Institutionen för energi och miljö; Chalmers University of Technology / Department of Energy and Environment
- PostJonisering som luftrenare. Mätstudie i laboratorium.(2011) Persson, Elin; Makhoul, Sara; Tillo, Lina; Chalmers tekniska högskola / Institutionen för energi och miljö; Chalmers University of Technology / Department of Energy and EnvironmentAir ionization is an air cleaning technology used to additionally clean air from particles and gases in order to achieve good indoor air quality. The technology mimics nature´s own ability to purify air of particles, microorganisms, organics and odors. The report includes an experimental study of air ionization as air cleaning in ventilation plants. The experimental study is made in a laboratory with two experimental arrangements with the purpose of studying the removal efficiency of particles, gases and odors when using point ionization (spetsjonisering) and an ionization tube. Since humans spend most of their lives indoors, it is an important factor that particles, gases and odors are removed so that good indoor air quality can be achieved. The study is made in a filter rig and in a constructed chamber. The filter rig studies are made to see the effect of point ionization and its efficiency to increase the separation degree of air-filters. Trials in the filter rig are made with different settings to study what gives the point ionization its best effect. Best effect is achieved with long distance between the point ionization and the air-filter, low flow and with re-circulated air. Experiments are also made with two different materials of air-filter where the results show that a synthetic filter gives the point ionization better condition than with glass fibre filters. Overall, the experimental study of the air-filter rig shows no clear effect of point ionization. Experiments conducted in the chamber with 100 % re-circulated air show however on a marked improvement of the separation degree of air-filter when point ionization gets turned on. The experiment with point ionization shows that measurements made with a Dust Trak (particles ≤2.5 μm) gives the highest efficiency. The decay speed of particles in size of 0.3-0.5 μm reduces when using ionization tube in the chamber compared to when only using air-filter and point ionization. The experimental study in the filter rig with point ionization does not show big improvement compared with the study made in the chamber. This could be due to the fact that the point ionization´s aggregate supplies the point tassels with too little voltage in relations to the flows used in the filter rig. The experimental studies from both arrangements show however that re-circulated air has a positive effect when using point ionization.
- PostKlimathållning i ishallar-ur publikens perspektiv(2011) Bylin, Christian; Chalmers tekniska högskola / Institutionen för energi och miljö; Chalmers University of Technology / Department of Energy and EnvironmentAlla sorters isaktiviteter utövades utomhus fram till i mitten av 1900-talet. Detta kunde vara blåsigt, regnigt och kallt. Man fick helt enkelt leva med väderförhållandena som var för tillfället. Sen blev kraven högre och möjligheterna att tillgodose dessa krav större. Man byggde väderskydd och med detta följde en standardhöjning. Denna standardhöjning har fortsatt något med åren men det är fortfarande rätt kallt inne i ishallar. Detta är något som vi finner acceptabelt eftersom det är något vi förväntar oss. Jag fick tanken att undersöka vad det skulle innebära om förväntningarna hos publiken istället skulle motsvara de krav som ställs på inomhusklimatet vid övriga inomhusaktiviteter till exempel teater. För att kunna göra detta krävs det att ta reda på vad ett bra inomhusklimat egentligen är. Studier kring bland annat luftkvalitet och vilka parametrar som påverkar vår upplevelse av klimatet utfördes. Arbetet fortsatte sedan med en objektsstudie på Åby ishall. Detta arbete var mer krävande än väntat då det fanns väldigt lite nerskrivet och den största delen av informationen har fåtts genom upprepade besök på plats samt genom intervjuer med relevanta personer. I stort sett hela luftbehandlingssystemet är kvar sedan hallen byggdes på sjuttiotalet och det finns delar av det som det helt enkelt inte går att hitta någon information om. Därefter inleddes arbetet med att försöka hitta lösningar och möjligheter med att utveckla dagens system till ett ur publikens perspektiv mer optimalt system. Detta gjordes främst med hjälp av litteraturstudier samt hjälp av personal på Chalmers tekniska högskola.
- PostLegionella i tappvattensystem. Förekomst och förebyggnade-en redogörelse.(2012) Persson, Tobias; Chalmers tekniska högskola / Institutionen för energi och miljö; Chalmers University of Technology / Department of Energy and EnvironmentLegionella can be prevented, the question is how. This report is a degree in construction engineering education at Chalmers University in Gothenburg. A comprehensive written publication for Legionella-safe plumbing installations is not available and therefore requested. The purpose of this report is to present preventative measures against Legionella bacteria growth in tap water and in other systems where Legionella bacteria are a potential problem. Technical solutions are presented including how different systems function and what their advantages and disadvantages are. Literatures in the field have been studied and additional information has been gathered through studies of existing projects and technical systems. There are many ways to decontaminate a tap water system that has difficulties with growth of legionella bacteria. These technical solutions range from pure mechanical treatment to addition of chemicals such as biocides. If the problems of Legionella growths are not repeated, the thermal disinfection is a good alternative. If the problem however is repeated and a general increase in temperature in the system does not stop the bacteria growths, then biocides should be used.
- PostLuft-, fukt- och temperaturmätningar i en gymnastiksal - en funktionskontroll.(2010) Karlsson, Simon; Kotov, Yury; Skyldeberg, Jonas; Chalmers tekniska högskola / Institutionen för energi och miljö; Chalmers University of Technology / Department of Energy and Environment
- PostSolvärme för en skola i Lerum. Studier av olika systemalternativ.(2012) Nordmark, Martin; Lind, Joakim; Chalmers tekniska högskola / Institutionen för energi och miljö; Chalmers University of Technology / Department of Energy and EnvironmentTwo elementary schools are now being built in Gråbo (in the municipality of Lerum), Röselidsskolan and Ljungviksskolan, which are both designed with solar thermal collectors for the schools domestic water heating. During the summer while the largest amount of solar heat can be generated, the activity hence the domestic water use in the schools are heavily reduced. Both schools are connected to the local district heating system which makes it possible to use the solar collectors to deliver heat to the district heating. The purpose of this thesis is to evaluate the two systems mentioned above and to determine which system is more suitable to apply on a school. The building which conditions were used for this evaluation is Röselidsskolan. A solar heating plant of each system type was dimensioned from the expected and known conditions of the building. The purpose with the dimensioning was to make the solar plants replace the ordinary energy source as much as possible. The solar plant for domestic water heating was dimensioned to cover 50 % of the annual energy consumption for heating domestic water. The plant for delivering heat to the district heating system was dimensioned from available space on the roof of the building and the summer load of the district heating system. The dimensioning resulted in the following systems: • Domestic water heating system: 35 m2 collector3 area, 2.6 m3 accumulation tank volume • Delivery to the district heating: 300 m2 collector area The solar plant which is built on Röselidsskolan has 126 m2 collector area and 4 m3 accumulation tank volume. The reason for the size of this system being this much larger than that dimensioned in this thesis is that the dimensioning for the built system was based on a estimated consumption of domestic water, much higher than that estimated in this thesis. The built system was dimensioned from an expected hot water consumption of 15 kWh/m2 per year, compare to 3 – 5,5 kWh/m2 per year that was found for this thesis by reweaving available statistics. However, the statistics for domestic hot water consumption in schools are very poor. 3 Aperture area IV The option of connecting the built solar collectors to the district heating is also evaluated in this thesis. This gives two additional systems: • Domestic water heating system: 126 m2 collector area, 4 m3 accumulation tank volume • Delivery to the district heating: 126 m2 collector area The four solar plants mentioned above have been simulated with computer software called Polysun. Due to the uncertainty of the domestic water consumption, the two systems for domestic water heating was simulated with three different heating loads within the span 3 – 5,5 kWh/m2,year. The yearly water consumption is distributed over the schools active time with a reduction by 20 % during the school holidays. Furthermore, the average cost for the solar energy for each solar plant is calculated with the annuity formula. The investment cost for a complete system where, with no regard to size, set to be 10000 kr/m2 solar collector for the domestic water heating systems and 7000 kr/m2 solar collector for the systems with delivery to the district heating. The investment cost, and the reasonable assumption of 20 years depreciation time and a cost of capital at 5 %, gave a relatively high cost for the solar energy. The most important results are:4 • The plant with 35 m2 collector area and 2.6 m3 accumulation tank volume is expected to generate 9 (12) MWh per year, and 260 (345) kWh/m2 collector area and year. The energy cost was calculated to 3,1 (2,3) kr/kWh. • The plant with 300 m2 collector area for delivery to the district heating is expected to generate 84 MWh per year, and 280 kWh/m2 collector area and year. The energy cost was calculated to 2,0 kr/kWh. • The plant which is built on Röselidskolan is expected to generate 13 (21) MWh per year, and 100 (165) kWh/m2 collector area and year. The energy cost was calculated to 8,0 (4,9) kr/kWh. • If the plant which is built on Röselidskolan instead was to deliver heat to the district heating it was calculated to generate 34 MWh per year. Following conclusions can be drawn: • For the alternative where the solar collectors deliver heat to the district heating, the potential for replacing the ordinary energy source is 6 to 9 times higher than the alternative to heat the domestic water supply. • The solar plant built on Röselidsskolan has been calculated to cover 70 to 80 percentage of the energy needed for hot water heating. This high coverage and the low hot water demand in the school during the summer makes the solar plant inefficient. If the plant instead was connected to deliver heat to the district heating it is expected to generate 65 to 170 percentage more useful energy.
- PostTermisk komfort i lågenergihus - en uppföljning genom mätningar och enkäter.(2010) Kwiatkowski, Robert; Yousofi, Farasat; Chalmers tekniska högskola / Institutionen för energi och miljö; Chalmers University of Technology / Department of Energy and Environment
- PostUtformning och drift av ventilationen i en förskola. En jämförelse mellan CAV och VAV-system.(2012) Larsson, Fredrik; Al-Tayyar, Natik; Chalmers tekniska högskola / Institutionen för energi och miljö; Chalmers University of Technology / Department of Energy and EnvironmentDagens samhälle är i behov och strävar efter att få ner energianvändningen. Inte minst i byggsektorn där nyare teknik och smarta innovationer gör att vi kan sänka vår energiförbrukning och då även få ner våra energikostnader. Ett sätt att reducera dessa båda faktorer är att byta ut gamla ventilationslösningar mot nya mer energieffektiva system. Att välja en viss typ ventilationssystem är däremot inte alltid ett enkelt beslut då det finns ett flertal olika principer av system man kan utgå ifrån för att ventilera en lokal och skapa ett bra inneklimat. De enklaste ventilationssystemen ger ett konstant luftflöde medans man med mer avancerade system kan använda sig av varierande luftflöden för att förse en lokal med frisk luft utefter det behov som finns. Denna rapport har i sin helhet tittat på de förutsättningar som finns då man utformar ett ventilationssystem för en förskola. Det har även gjorts en kostnadsjämförelse mellan två olika systemlösningar vilket senare jämförts med varandra i en livscykelkostnadsanalys för att se på kostnaderna under ett längre tidsperspektiv. Det ena systemet med konstant luftflöde och högre energiförbrukning har varit ett så kallat CAV-system. Det andra med varierande luftflöden och lägre energiförbrukning, dock med en större investeringskostnad, är ett så kallat VAV-system. Som referensobjekt till undersökningen och för att avgränsa projektet har Hammerö förskola i Kungsbacka kommun använts Den information som har samlats in och bearbetats till rapporten, tillsammans med fältundersökningar och kontakt med olika personer, visar på vikten av att förse en förskola med frisk luft. Både för att säkerställa ett bra inneklimat för personalen men även för att barn är en mer känslig grupp och påverkas lättare av olika luftföroreningar. Beräkningarna som har gjorts för att titta på vilket system som är det mest kostnadseffektiva valet visar att det mer avancerade systemet med dess högre investeringskostnader inte lönar sig på lång sikt. Detta till trots att systemet drar mindre energi. Resultatet kan dock tolkas på olika sätt. Val av ventilationssystem uppfyller olika kriterier där ett system som förbrukar mindre energi, trots att det är dyrare i investering, kan vara ett bättre val för vår miljö.